See all the robots

PUDU D5

Transport and inspection outdoors

A robot for carrying loads and making inspection rounds between buildings, on routes with steps, grass and gravel. The choice of feet or wheels depends on the terrain and the task. We help select the accessories, install the robot, configure its routes and support your operation.

The PUDU D5 seen at three quarters, standing on its four legs, with the front camera and the joints showing.

Two versions, chosen for your route

The D5 walks on four feet. The D5-W has a wheel at the end of each leg. These are two versions: the choice depends on the terrain and the routes it will use most often.

Three-quarter view of the PUDU D5 on four feet.

PUDU D5

On feet

  • Stairs and steps are part of the route.
  • The ground is loose or uneven: earth, gravel or grass.
  • The route alternates between paved areas and natural terrain.
Three-quarter view of the PUDU D5-W, with a wheel at the end of each leg.

PUDU D5-W

On wheels

  • Most of the route is flat: paving, car parks, corridors.
  • There are long distances to cover on wheels.
  • The legs allow it to negotiate changes in level along the route.

Uneven terrain and bad weather

Outdoors, surfaces and conditions vary along the route. We assess changes in level, the load and exposure to weather to select the version and plan its route.

  • Steps and stairs

    Its legs allow it to climb and descend steps and kerbs. Obstacle height and the load it carries are part of the route assessment.

  • Ramps and slopes

    It adjusts its posture on climbs and descents. The gradient and available grip determine which routes are suitable.

  • Earth, gravel and grass

    The legs help keep the load stable on uneven ground. Loads need to be secured to the carrier during transport.

  • Rain, dust and cold

    Designed for outdoor work, with protection against water and dust. We check the temperature and exposure limits for the intended location.

Two recurring tasks

Moving materials between points and following an inspection route: two tasks that can take up your team’s time several times a day.

Carrying loads

With the cargo carrier fitted to its back, it moves boxes and materials between points, such as from a van to a doorway, reducing manual carrying.

Inspection rounds

With the inspection kit fitted, it follows a defined route through a car park, warehouse or around a perimeter. Your team can view the camera feed remotely.

Navigation and control

Sensors help the D5 find its way along the route. Your team uses the controller to monitor its work and can use the interaction features supported by the selected version.

The D5 seen from above, with the areas its sensors cover drawn around it.

Sensors and cameras

Laser sensors and wide-angle cameras help the robot locate itself and detect obstacles along the route.

Three-quarter view of the D5, with waves around its head representing voice interaction.

Voice and gestures

The manufacturer advertises voice commands, gesture recognition and person-following features. We confirm with the supplier which are available on the proposed version.

Remote control

The handheld controller lets your team check the robot’s status, view the live camera feed and send commands.

The D5 in numbers

The figures the manufacturer publishes for both versions. Where the wheeled version differs, it has a column of its own.

  • 45°Slope, up and down
  • 20 to 30kgContinuous walking payload
  • −20 to 55°COperating temperature
  • IP67Protection against water and dust
Further specifications of the PUDU D5 and the PUDU D5-W
CharacteristicD5On feetD5-WOn wheels
Standing dimensions900 × 543 × 572 mm
Weight with battery56 kg
Maximum step height30 cm25 cm
Climbing capabilityUp to 80 cm
Battery1000 Wh
Operating time2 to 2.5 h2 to 3 h
Cold startBelow −10 °C
Maximum joint torque165 N·m
Sensors2 3D LiDARs and 4 wide-angle cameras
ComputingNVIDIA Jetson Orin AGX 64 GB and RK3588

Figures published by PUDU Robotics and checked by us on 16 November 2026. For the full datasheet of either version, talk to us.

Accessories for the job

Cargo carrier, inspection kit and charging station: the choice depends on the task and how the robot will be used.

The D5-W in a square, with the metal cargo carrier fitted to its back.

Metal cargo carrier

A frame with straps to secure boxes and materials during transport.

The D5-W in a car park, with the inspection kit fitted on its back.

Inspection kit

Cameras on a swivelling mount above the robot’s body, providing a view of the inspection route.

The D5-W beside its charging station, in a service corridor.

Charging station

Where the robot charges between shifts.

Some features advertised by the manufacturer are not yet available. Before preparing a proposal, we confirm with the supplier which features and accessories come with the version to be supplied.

Is the D5 right for your operation?

During a site visit, we assess the terrain, routes and tasks so we can propose a configuration and a quote.